Swingarm Guard Instructions
1. Fit guard onto swing arm
2. Align holes and insert all bolts, loosely tighten
3. Check fitment and tighten
DO NOT over tighten bolts as this may damage the guard. Apply silicone to the base of the cap screw to stop from loosening.
4. Position zip-ty just in front of axle. Tighten over the guard and around the back of the swing arm
5. Cut off excess zip-ty
HINT : Wrap the swing arm in duct tape before applying guard to prevent friction.
Questions? Call Jay @ 763-263-9835 or E-mail email@example.com