Skid Plate Instructions


Secure bike in a safe manner... cold motor with fuel shut off

1.  Start with the front bracket; use threaded installation tool to loosely hold the bracket in place

2.  Thread a bolt into the opposite side, slightly snug

3.  Remove the installation tool and insert the second front bracket bolt

4.  Tighten both bolts only enough to hold plate in place

5.  Insert the rear mount bolts

6.  Once all bolts are in place, tighten evenly

DO NOT USE LOCTITE® on Hyde Racing Brackets

TIP: Once you have determined where the front mount will ride, use a dab of silicone sealer to adhere mount to frame making it stationary upon removal of skid plate.

Questions? Call Jay @ 763-263-9835 or E-mail [email protected]